Author Topic: "Jambar" question: the tool, not the newspaper  (Read 6141 times)

Offline Wick250

  • Emperor Penguin
  • *****
  • Posts: 2526
    • View Profile
"Jambar" question: the tool, not the newspaper
« on: September 03, 2019, 11:59:59 AM »
I am all for the hardhat and the sledgehammer if it improves team cohesion and morale.  But has anybody actually seen a real jambar.  I can't find a picture.  I know it was a steel mill tool and used to pry components that were stuck.  If it turns out that the jambar looked vicious and menacing, would that not make a perfect item for this team-building exercise?  Unique with deep meaning to this former steel community.  Better than the generic sledgehammer that many colleges use.  We could probably make one via additive manufacturing.

Of course, if the jambar was small and anything but vicious in appearance, this would be stupid idea.

Offline go guins

  • Emperor Penguin
  • *****
  • Posts: 2453
    • View Profile
Re: "Jambar" question: the tool, not the newspaper
« Reply #1 on: September 03, 2019, 12:17:52 PM »
and I thought it was just the name of the school paper like "tribune"!
Watching Penquins Football & Basketball since 1967!

Offline IAA Fan

  • Administrator
  • Emperor Penguin
  • *****
  • Posts: 12051
  • Bring Coke back to YSU!!
    • View Profile
    • ysupenguins.com
Re: "Jambar" question: the tool, not the newspaper
« Reply #2 on: September 04, 2019, 06:26:04 PM »
I never figured it out myself. Will need to research. I know that we used to call it a "Johnny Bar" and it is used for the bolts on a toilet that secure it to the floor. Also it is Spanish for consume or some type of consumption. I just figured that they mean it was food for your mind and never understood the Spanish. Always read the paper. Before and after college.

Offline Wick250

  • Emperor Penguin
  • *****
  • Posts: 2526
    • View Profile
Re: "Jambar" question: the tool, not the newspaper
« Reply #3 on: September 05, 2019, 12:05:37 AM »
IAA Fan,

I saw that there is a small toilet wrench called a jam-bar, but that has nothing to do with the tool that they used in the steel mills.  This was some type of large pry bar, and the school newspaper was named after this thing.  I have had no luck finding a picture of it.

jimmiejames

  • Guest
Re: "Jambar" question: the tool, not the newspaper
« Reply #4 on: September 05, 2019, 01:28:24 AM »
I often thought the “J” in Jambar resembled the tool.

jimmiejames

  • Guest
Re: "Jambar" question: the tool, not the newspaper
« Reply #5 on: September 05, 2019, 01:29:25 AM »

Offline Wick250

  • Emperor Penguin
  • *****
  • Posts: 2526
    • View Profile
Re: "Jambar" question: the tool, not the newspaper
« Reply #6 on: September 05, 2019, 09:15:54 AM »
Thanks jimmie.  That has to be it.  If that thing was 5 or 6 feet tall, it would be perfect.

Offline penguinpower

  • Emperor Penguin
  • *****
  • Posts: 2880
    • View Profile
Re: "Jambar" question: the tool, not the newspaper
« Reply #7 on: September 06, 2019, 06:35:23 AM »
Thanks jimmie.  That has to be it.  If that thing was 5 or 6 feet tall, it would be perfect.

Someone needs to verify this with an old timer and bring this to the attention of the university athletic department.  This would be far more meaningful and also remind people and be free advertisement for the school paper.

jimmiejames

  • Guest
Re: "Jambar" question: the tool, not the newspaper
« Reply #8 on: September 07, 2019, 12:57:51 AM »
looks like a tool attached to the Jambar sign, size may not be accurate, I am thinking the shape is.

Offline penguinpower

  • Emperor Penguin
  • *****
  • Posts: 2880
    • View Profile
Re: "Jambar" question: the tool, not the newspaper
« Reply #9 on: September 07, 2019, 07:36:34 AM »
I remember seeing one of those at my grandfather's house.